Infusion Set for Single Use (IS-VZGB-I)

General specificationsThey are suited to hard containers and to soft bags (for the first, use I. V. Sets with air inlet)Easy and exact rate thanks to the flow regulator.Bacteriostatic filter (porosity 0.2 micron) Length of the tubing between 130 and 180 cm., depending from the modelsMain accessories: Vented spike, Dripping Chamber, Solution Filter, Roller Clamp, latex tube, Luer Lock Adapter, Hypodermic needleComponents specificationsProtective cap for closure piercing device made of polyethylene with internal thread that prevents the bacteria from coming in, but allows the entrance of ETO gas.Closure piercing device made of white PVC, with sizes according to ISO 1135-4 standardsWater-repellent filter, polypropylene support + hydrophobic filtering paper, made of acrylic resin and nylonON/OFF Cap: Red polypropyleneDrip chamber made of soft PVC, sizes according to the ISO 8536-4 standardsFluid filter support made of polyethylene + nylon net. Net opening 15 micronFlow Regulator made of polyethyleneTubing made of soft medical grade PVC, minimum internal diameter 2.7mmTerminal fitting protective cap (luer slip or Luer-lock adapter upon request) made of PVC or polystyrene, according to the ISO 594/1 and 594/2 standards.Terminal fitting protective cap made of polyethyleneSterilization methodEthylene oxyde 10 % + CO2 90 % validated cycle according to the EN 550 stan product offered by Changzhou Heshou Medical Appliance Factory